How do Computer Keyboards Work? 🤔⌨⌨🛠 - 雙語字幕
You might not think it, but basic computer keyboards have a surprisingly impressive amount of engineering inside.
We're not talking about incredible engineering like a rocket that can land itself, or a stealth aircraft that can evade radar.
Rather, we're talking about the engineering of cost reduction.
Specifically, this keyboard has only 8 critical parts inside, essentially removing all the
components costs,
so that you can buy them in bulk for as little as $1.57 each,
engineering something that is durable, functional and costing next to not thing is indeed a feed on its own.
So let's look inside this dirt cheap keyboard and see how only a few critical components enables it to work.
After that,
we'll open a mechanical keyboard that costs over 50 times as much and see the difference,
as well as find out What causes that clicking sound inside the mechanical keys?
So, let's jump right in.
This inexpensive keyboard is assembled from 148 parts,
and almost all the parts are the keys, screws, and the top and bottom plastic casing, leaving us only 8 critically.
parts inside.
These components are a rubber sheet with domes under each key and three plastic sheets.
The top and bottom sheets have conductive wires printed onto them with dots under each key and the middle sheet acts as a spacer with
holes cut out of it.
The remaining four-coated components are two batteries,
a bracket to clamp down the plastic sheets,
and a small printed circuit board,
which has a simple microprocessor,
a crystal oscillator,
a switch,
a 2.4 gigahertz planar antenna,
a pair of wires to connect to the batteries,
and a set of conductive lines to connect to Connect to the wires printed on the top and bottom plastic sheets.
So now that we've seen the few components inside, how do they work?
Well, the main idea is that the batteries and microprocessor apply 3 volts to all the
traces on the top sheet are actively being monitored by the processor on the PCB.
When a key is pressed,
it presses on the rubber dome,
which pushes the conductive circle from the top sheet down through the air gap created by the middle sheet and into the circle
on the bottom sheet, thereby bridging the connection between top and bottom plastic.
sheets.
The three volts then travels along the conductive trace of the bottom sheet through the whole of the key that has been pressed and into the top
sheet's trace and then returns back to the PCB and microprocessor where it sensed.
When you let your finger off the key the rubber dome returns the key to the position, thereby opening the connection.
On the top sheet of plastic are 12 traces,
and on the bottom sheet are 11 traces, with each trace traveling to a different set of keys.
It's visually hard to see here, so let's reorganize these traces into a grid.
also called a keyboard matrix, with the bottom traces forming the columns and the top traces forming the rows.
Just as before, the microprocessor outputs three volts along each column, while actively monitoring the inputs along each row.
With this reorganization,
you can more easily see that as you press the Y key,
three volts is sent out along the fourth column and returned along the second row.
And thus, the processor can tell that the Y key was pressed.
Or with the B key, three volts is output along the eighth column and input through the first row.
With 11 columns, and 12 rows, we can have a maximum of 132 which works out well, because the keyboard only has 111 keys.
However, if you haven't noticed, there's actually a major problem with this keyboard matrix.
That is, if we have through 3 volts running along all these columns and we press a key, 3 volts will return along a row.
However, because each of these columns output the same 3 volts, how do we know which key in the row was pressed?
Well, there are a few solutions to this problem.
One solution is to quickly scan three volts along each of the 11 columns, so that at any given time only one column is active.
By correlating the active column with when voltage is received on the input row,
we can determine the exact intersection of column and row and thus which key is pressed.
However, with this solution, were continuously scanning three volts across the columns, which takes power, thereby draining the batteries.
So instead,
we found that it's more practical to have three volts on each column,
and when the key is pressed,
a cycle of pulses of turning off one column at a time is sent to determine which key in a row is pressed.
These pulses are sent for 65 microseconds to each column, once every 4 milliseconds.
Therefore, if the G key were pressed, then the key were pressed, then the second and sixth row inputs would see a voltage that
looks like this.
and all the other rows would see nothing.
Now that the microprocessor knows which keys are pressed, it sends the data to the 2.4 GHz transceiver using these printed planar antennas.
We'll cover these antennas as well as the oscillator in another video.
But for now, let's close this inexpensive keyboard and look inside a mechanical keyboard that costs over 50 times more.
But before exploring mechanical keyboards, the next portion of this video is sponsored.
Virtual Event, Keysight World, live from the lab.
In this live stream,
Keysight will be exploring batteries,
DC to DC converters, and a wide range of IoT devices through hands-on design analysis and Q&A sessions with industry experts.
Sign up quickly.
because the next Keysight Live event is May 16th,
and by attending this live stream, you'll be entered to win an oscilloscope in their test gear giveaway.
In fact,
the only way we were able to reverse engineer this keyboard was with an oscilloscope just like this one,
where we could easily see the cycling of off-pulses whenever a key is pressed.
At key sites upcoming live from the lab event,
you'll learn many useful tools,
such as how temperature can affect battery and device life, as well as techniques and tricks for using DC to DC converters in your designs.
Whether you're an expert engineer or electronics newbie, it will be better.
plenty of opportunities to learn new things.
Hurry up and register for the May 16th Keysight World Livestream using the branch education link,
and you'll get an extra entry into Keysight's huge test gear giveaway.
Go check it out!
But now, let's get back to the inside of this mechanical keyboard.
Instead of seeing plastic sheets, we find a rather large printed circuit board, with mechanical keys soldered to it.
This PCB functions similarly to the keyboard matrix, but now we have an LED under each key to create attractive designs.
However, quite with a mechanical keyboard is that these keys have a different tactile feel and make a clicking sound when pressed.
So let's look inside one of these keys where we find a keycap on top,
the stem and slider below that,
a top and bottom switch housing and inside are is spring and two metal contacts,
which are also called metal contact leaves or gold crosspoint contacts.
The main mechanism is that when you press a key down, it moves the stem and slider.
The slider is uniquely shaped such that it pushes one of the contacts away from the other.
and when pressed down,
the slider moves out of the way,
allowing for one of the metal contacts to spring outwards and hit the other,
thus creating a connection between the two pieces of metal and causing a click sound when they hit.
When you release the key, the spring pushes the slider, the stem.
and the key back up and the slider re-engages the metal contact, thus separating the two metal contacts and opening the connection between them.
The and slider are separate components so that if you accidentally brush a key,
the key cap and stem can travel a small distance down before the slider is engaged.
However, once the slider is pushed a fraction of a millimeter down, the metal contact quickly forces the slider to jump out of the way, allowing the metal
contacts to engage.
By having such a mechanism, each key has a more tactile feel when pressed.
from the key hitting the rubber dome.
That said,
having a large PCB such as this, as well as an intricate mechanism inside each key, causes the keyboard to be significantly more expensive.
But depending on your preferences, it can be worth it.
Finally, there are laptop keyboards which have a scissors switch mechanism, along with rubber domes, to allow it to have a lower profile.
But let's wrap it up for now.
This is moderately simple, but we think it properly highlights the cost difference and engineering in two similar items.
We're working on more videos that dive deeper into the end.
engineering inside computer architecture and other complex technologies, so be sure to subscribe, hit that like button and share this video with others.
We believe the future will require a strong emphasis on engineering education and we're thankful to all our Patreon and YouTube
sponsors for supporting this dream.
If you want to support us on YouTube memberships or Patreon, you can find the links in the description.
This is Branch Education and we create 3D animations that dive deeply into the technology that drives our modern world.
Watch another branch video by clicking one of these cards, or click here to subscribe.
Thanks for watching to the end.
解鎖更多功能
安裝 Trancy 擴展，可以解鎖更多功能，包括AI字幕、AI單詞釋義、AI語法分析、AI口語等
兼容主流視頻平台
Trancy 不僅提供對 YouTube、Netflix、Udemy、Disney+、TED、edX、Kehan、Coursera 等平台的雙語字幕支持，還能實現對普通網頁的 AI 劃詞/劃句翻譯、全文沉浸翻譯等功能，真正的語言學習全能助手。
支持全平臺瀏覽器
Trancy 支持全平臺使用，包括iOS Safari瀏覽器擴展
多種觀影模式
支持劇場、閱讀、混合等多種觀影模式，全方位雙語體驗
多種練習模式
支持句子精聽、口語測評、選擇填空、默寫等多種練習方式
AI 視頻總結
使用 OpenAI 對視頻總結，快速視頻概要，掌握關鍵內容
AI 字幕
只需3-5分鐘，即可生成 YouTube AI 字幕，精準且快速
AI 單詞釋義
輕點字幕中的單詞，即可查詢釋義，並有AI釋義賦能
AI 語法分析
對句子進行語法分析，快速理解句子含義，掌握難點語法
更多網頁功能
Trancy 支持視頻雙語字幕同時，還可提供網頁的單詞翻譯和全文翻譯功能